The highest strength-to-stiffness thermoplastic available for continuous use up to 260°C.
The highest strength-to-stiffness thermoplastic available for continuous use up to 260°C. Reserved for parts under real mechanical stress at high temperature.
Exceptional strength and stiffness at sustained high temperature, with very low creep under load.
Only for genuinely demanding applications — aerospace fasteners, non-lubricated bearings, high-temp seals — where the cost is justified.
Aerospace structural fasteners, non-lubricated bearings, high-temperature seals.
Holds very tight tolerances well but often needs a post-machining thermal cure step to reach full strength — confirm this step with the partner.
| Density | 1.41-1.46 g/cm3 |
| Typical Hardness | Rockwell E80-M120 |
| Typical Strength | 18,000-24,000 PSI tensile |
| Lead Time | Confirmed per RFQ |
| Finishing | Confirmed per RFQ |
Upload your CAD file, materials, and target quantity — we'll come back with a manufacturability review and a quote. Our engineers review every request personally.