Additive manufacturing for early design checks, complex geometries, and low-volume functional parts.
| Processes | SLA, SLS, PolyJet, MJF, FDM, DLS |
| Typical lead time | 3-5 days |
| Materials | 24 materials across all six processes — full list on our Materials & Finishes page → |
| Best for | Early design verification, complex geometry |
| Max part size | Custom envelope sizes available — send your dimensions with your RFQ and we'll confirm fit. |
Six additive processes, matched to your prototype or production need.
A UV laser cures liquid resin layer by layer, producing the smoothest surface finish and finest feature detail of the additive processes.
A laser fuses nylon powder with no support structures needed, so complex and interlocking geometry prints in one piece.
Jets and UV-cures liquid photopolymer droplets layer by layer, producing multi-material and multi-color parts with very fine surface detail.
An inkjet-applied fusing agent and heat fuse nylon powder across a full layer at once, producing strong, consistent parts faster than laser-based sintering.
Melted thermoplastic filament is extruded layer by layer — the lowest-cost process, suited to early prototypes and functional test parts.
A continuous UV light image projects through an oxygen-permeable window into a liquid resin pool, producing parts with production-grade mechanical properties straight off the printer.
24 materials across all six processes, on our Materials & Finishes page →
Upload your CAD file, materials, and target quantity — we'll come back with a manufacturability review and a quote. Our engineers review every request personally.